Electrochemical performance of in situ LiFePO4 modified by N-doped graphene for Li-ion batteries

LiFePO₄ modified by N-doped graphene (NG) with a three-dimensional conductive network structure was synthesized via a one-step in situ hydrothermal method. The effects of N amount of NG on the phase structure, morphology, and electrochemical properties of LiFePO₄ are investigated in this study. X-ray diffraction (XRD) results show that doping suitable N amounts in NG do not alter the crystal structure of LiFePO_4, and scanning electron microscopy (SEM) images show that NG can slightly reduce the particle size of LiFePO₄. The high-resolution transmission electron microscopy (HRTEM) results show that the LiFePO₄ particles are well covered and connected by NG. The electrochemical performance confirms that LiFePO₄ modified by 20% N-doped graphene (named LFP/NG-4) displays a perfect specific capacity of 166.6 mAh·g^?1 at a rate of 0.2C and can reach 125 mAh·g^?1 at a rate of 5 C. Electrochemical impedance spectroscopy (EIS) results illustrate that the charge transfer resistance value of the LFP/NG-4 composite is only 58.6 Ω, which is very low compared with LiFePO₄. Cyclic voltammetry (CV) tests indicate that the addition of 20% N-doped graphene can effectively reduce electrode polarization and improve reversibility. The LFP/NG-4 composite with a three-dimensional conductive network structure can be regarded as a promising cathode material for Li-ion batteries.     

One-step preparation of the superhydrophobic Al alloy surface with enhanced corrosion and wear resistance

Corrosion and wear failures are bottlenecks for restricting applications and developments of Al-based functional materials. As a new lubrication technology, superhydrophobic preparation provides an effective way to settle Al alloy corrosion. The preparation methods of superhydrophobic Al alloys are mainly multistep strategies. In this study, superhydrophobic Al alloy, has been prepared by an efficient one-step electrochemical etching process. Meanwhile, its micromorphology has been observed by a scanning electron microscope. The wettability has been measured by video optical contact angle meter. The corrosion behavior has been tested by electrochemical workstation, and wear performance has been characterized by friction tester. The results show that the micro-nanoterraced concave–convex structure has been fabricated and an as-prepared surface exhibits excellent superhydrophobic behavior. Further electrochemical and tribological tests show that corrosion resistance and wear resistance have also been significantly improved. This study provides a new method to prepare wear-resistant and corrosion-resistant Al alloy for widening applications of multifunctional Al-based engineering materials.     

Reduced‐scale test to assess the effect of fire barriers on the flaming combustion of cored composites: An upholstery‐material case study

Herein, we describe a reduced‐scale test (“Cube” test), measuring the fire performance of specimens including a fire barrier (FB) and a flammable core material, which acts as the main fuel load. The specimen is intended to reproduce a cross‐section of a composite product where heat/mass transfer occurs primarily in a direction perpendicular to the FB. The Cube test procedure and benefits are discussed in this work by adopting residential upholstery furniture as an exemplary study. One flexible polyurethane foam, one polypropylene cover fabric, and 10 commercially available FBs were selected. They were used to compare the fire performance of FBs, measured in terms of peak of heat release rate, in the ASTM E1474‐14 standard test and the newly developed Cube test. Edge effects severely affected the performance of FBs in the ASTM E1474‐14 standard test but not in the Cube test. Furthermore, appropriate test conditions were determined in the Cube test to measure the so‐called “wetting point,” that is, the time and value of heat release rate measured when flammable liquid products were first observed on the bottom of the specimen. The relevance of the “wetting point” in terms of full‐scale fire performance and failure mechanism of FBs is discussed.     

Challenges and strategies of all-inorganic lead-free halide perovskite solar cells

Hybrid lead halide perovskite solar cells (PSCs) have experienced a rapid development in the past decade and a certified efficiency up to 25.5% has been achieved. However, the presence of toxic lead component and the inherent poor thermal stability of the organic cations in the hybrid lead halide perovskites obstruct the commercial applications of their corresponding photovoltaic devices. Therefore, fabricating high-efficient all-inorganic lead-free PSCs is a promising direction. This review summarizes the related research progress, which mainly focuses on the structural and optoelectronic properties of inorganic lead-free perovskites and devices. In particular, the strategies for improving the properties and stability of Cs–Sn perovskites, as well as enhancing the photovoltaic performance of the corresponding devices are highlighted. An outlook of challenges and future directions regarding to all-inorganic lead-free PSCs are also proposed.     

Fracture behavior of solid electrolyte LATP material based on micro-pillar splitting method

The NASICON type solid electrolyte LATP is a promising candidate for all-solid-state Li-ion batteries considering energy density and safety aspects. To ensure the performance and reliability of batteries, crack initiation and propagation within the electrolyte need to be suppressed, which requires knowledge of the fracture characteristics. In the current work, micro-pillar splitting was applied to determine the fracture toughness of LATP material for different grain orientations. The results are compared with data obtained using a conventional Vickers indentation fracture (VIF) approach. The fracture toughness obtained via micro-pillar splitting test is 0.89 ± 0.13 MPa?m^1/2, which is comparable to the VIF result, and grain orientation has no significant effect on the intrinsic fracture toughness. Being a brittle ceramic material, the effect of pre-existing defects on the toughness needs to be considered.     

巨型水轮发电机剪断销研发与质量控制

为获得设计需要的巨型水轮发电机剪断销的剪切力,得到剪切力波动受控的批量剪断销,通过拉伸试验、冲击试验、硬度试验和剪断销剪切试验等讨论了全尺寸剪断销剪切试验的可行性,分析了剪切试验时正常剪断和非正常剪断的剪断销材料性能差异,探究了剪断销的剪切力质量稳定性控制方法。结果表明:控制剪断销料坯的布氏硬度波动,可实现间接控制剪断销剪切强度的波动;通过试验总结的六步法可达到控制批量剪断销质量和剪切力波动的目的。     

堆本体抗震试验动力相似关系推导与验证

为确保堆本体抗震试验中流体对流效应、脉冲效应和堆本体结构响应的准确性，需保证重力、流体与固体惯性力、结构弹性力和结构应变的相似性。本文从固体结构的振动方程、不可压牛顿流体的动力学方程、流固交界面的边界条件和环形柱体域内液体线性晃动的动力学公式出发，基于控制方程的量纲分析法，推导了考虑液体晃动效应的堆本体地震响应动力相似关系。基于上述相似关系建立了堆容器堆内构件和堆容器内自由液面流体域的缩尺模型，通过有限体积法分析堆容器堆内构件原型和缩尺模型中液体的晃动固有频率、晃动波高、压力以及液体晃动对堆容器支承裙的倾覆力矩。结果表明本文动力相似关系具有合理性和准确性，可用于堆本体缩尺模型的抗震试验研究。     

Spectral radiance reconstruction from trichromatic camera responses based on orthogonal test and regularized algorithm

Reconstruction of spectral information based on multi‐channel image system is a significant problem in color reproduction, detection, and recognition. A spectral radiance reconstruction from trichromatic digital camera responses is researched in this article. The mapping relationship between the trichromatic imaging system response and the incident spectral radiance is analyzed. Then, in order to remove the ill‐posedness of the problem, a regularized constraint solution model of spectral radiance reconstruction matrix is established. And the spectral radiance can be reconstructed by spectral radiance reconstruction matrices and trichromatic imaging system response. Finally, the spectral radiance reconstruction matrix is estimated by the system radiometric calibration experiment. The input radiance is offered by a LCD display. A 3‐factor and 9‐level orthogonal test is designed for the calibration experiment, and a test set of 24 colors is used for precision analysis. The results show that the average relative mean error of our method is 8.69%, it is lower than that of Wiener filtering method by 2.84%. The method can reconstruct spectral radiance information effectively.     

Effect of particle grading on fracture behavior and thermal shock resistance of MgO-C refractories

Two types of MgO-C refractories with tight particle grading and non-tight particle grading were prepared according to Andreasen's continuous packing theory. Fracture behaviors were investigated using wedge splitting tests combined with digital image correlation method and acoustic emission techniques. The results indicated that MgO-C refractory with non-tight particle grading treated at 1400 ℃ had more in situ phases (e.g., AlN and MgAl₂O₄) and exhibited less brittleness than specimens with tight particle grading even though they had similar nominal tensile strengths. In contrast, specimens with non-tight particle grading had greater horizontal strain under various loading stages, reflecting their better ability to resist rupture deformation. In addition, more microcracks were initiated earlier in the pre-peak region, and more energy was consumed. The decrease in coarse particles and corresponding increase in fine powder content increased the interface between particles, benefiting for reducing the local stress concentration and improving the thermal shock resistance of refractories.